Industrial portable sewing machine made for the patchwork and quilter.


Larger throat area 9" x 6"

Feed dogs can drop making it a true quilting machine not just labeled as a quilting machine

( beware of machines with plates to cover the feed teeth they drop out and rip the quilt)

Supplied with specialist feet for patchwork and quilter.

Fast and smooth. Full of features no not normally found on machines of this type

Manufactured by JUKI the largest industrial machine manufacturer in the world and the industrial breeding shows in its design, construction, and operation

Japanese quality guaranteed meets all NZ and Australian saftey approvals

ROTARY HOOK & Easy Bobbin Replacement
A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin. ** see note below
Automatic Thread Trimmer
The machine is equipped with an automatic thread trimming device that simultaneously cuts the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism that is similar to the industrial sewing machine type.
Foot Pedal Switch for Thread Trimming
As with an industrial sewing machine, the thread trimmer can be activated with the foot pedal switch. It greatly increases sewing efficiency.

Two Types of Quilting Foot

Two types of quilting feet are supplied as standard accessories with the machine.

A 1/5 Quilting Foot is used for basic quilting and the 1/4 Quilting Foot for precision sewing with 1/4 inch stitch width.

High stemmed round feet perfect for on the Swiftquilter to see your work

True 1/4 Round to run against templates now supplied with a teflon guide click here to follow this link

Heavy duty METAL construction ( no plastic to break)

The feed dogs can be raised and lowered simply by moving the lever

When quilting, the drop feed allows you to sew curved stitches with ease.

NO clumsy plates to hide the teeth

Predetermined Stop Position of the Needle
To move the needle up or down as desired, simply press the needle up/down button.

When the button is pressed continuously, the machine sews stitch by stitch at low speed, great for finishing

Also used to pull bobbin thread to the top. No need to reach for the handwheel

Automatic Needle Threader
The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.

Heavy-Weight Materials are sewn with Ease

The speed control mechanism, operated by microcomputer, allows the machine to sew material at low speeds. This provides for accurate feed and perfect stitching when sewing heavy weight fabrics, quilting and multiple layers of materials.

Knee Lifter Lever
The knee lifter lever allows you to lift / lower the presser foot without using your hands
Adjustment of Presser Foot Pressure
Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine
optional fitted front and rear handles with stipple box and trim button makes it a perfect setup on the Swiftquilter ($250.00) or check the package deals
Even Feed Foot
With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvet, as well as heavy weight materials such as leather

Stipple control now works with foot control for even control quilting off the Swiftquilter


Proper industrial quality machine for piecing and quilting has
Knee lift,
large work table,
1/4 foot, walking foot,
2 metal round quilting feet 1/4" &1/5",
Zipper foot,
1/4"Compensating foot,
Hemming foot,
large cap rotary bobbin X5,
1500 stitch per min.
Needle threader.
Drop feed,
Thread trim on machine and on foot pedal.
Needle up/down button
Dust cover
Tool kit

Sewing Speed Max. 1,500r.p.m
Stitch Length Max.6mm
Lift of the Presser Foot By Lever Max.9mm, by Knee Lifter Max. 12mm
Needle HAx1 (130/705H) #7-#18 (HLx5#9-#16)
Dimensions 452 (W) x 350 (H) x 219 (D) (mm)
Weight (Machine only) 11.5kg
Rated Voltage / Power Consumption 220-230V / 0.5A, 95W
Power Consumption of the Lamp 12V, 3W
Auxiliary Table (Dimensions) 590 x 277 (mm)
Hook Horizontal-axis Full-rotary Hook

2 pin plug for New Zealand And Australia


many domestic machines cant run at high speeds as they dont have a rotary hook for the bobbin this is why most machines are only 800 stitches per minute. Many of these machines are very prone to vibration even at 800spm

The Juki with its industrial breeding has rotary hook and high speed 1500 spm

Juki Sales click the link to

Package price

Swiftquilter EXTRA


60"+48"= 108" extra kit

Juki TL98p

Front and rear handles

Stipple controls switchable front to back


Direct sales only Prices incude GST


WE have SAA approval for selling in Australia

the prices work out to be almost the same as advertised in NZ$ (email for a quote)

Prices shown are your landed price

Australian GST and customs charges included

CBA bank account for easy payments